Close

SU80

NO - SP - ST

The SU80 is an up-rated version of the SW80 Contactor designed for Interrupted and Uninterrupted loads.  It is suitable for switching Resistive, Capacitive and Inductive loads.  Typical applications include, but are not limited to, electric motors, hydraulic power packs, winches, speed controllers, UPS and Power Distribution Systems.

The SU80 features single pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity.  Economical in price they compare favourably with sealed automotive style solenoid switches which cannot be serviced or inspected for contact wear.  Mounting can be vertical or horizontal, when vertical the M8 contact studs should point upwards.  If the requirement is for downwards orientation we can adjust the contactor to compensate for this.

SU80 Technical Information

Application
InterruptedRating ( Ith )Uninterrupted
Thermal Current Rating 150A 200A
Intermittent Current Rating:
30% Duty 275A 365A
40% Duty 235A 315A
50% Duty 210A 285A
60% Duty 195A 260A
70% Duty 180A 240A
Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*)
Blowouts 800A at 80V D.C.
No Blowouts 800A at 48V D.C.
Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*)
Blowouts 300A at 96V D.C.
No Blowouts 300A at 60V D.C.
Maximum Recommended Contact Voltages
Blowouts 96V 96V
No Blowouts 48V 60V
Typical Voltage Drop per pole across New Contacts at 150A 40mV

Mechanical Durability > 3,000,000 Cycles
Coil Voltage Available (Us) (Rectifier board required for A.C.) 6 - 240V

SU80 Features

Component Configurations
Auxiliary
STANDARD
STANDARD - GOLD
V3
V3 - GOLD
Coil Suppression
DIODE
DIODE AND RESISTOR
BI-DIRECTIONAL DIODE
Coil Terminations
AMP TAGS
FLYING LEADS
PLUG
VACCUM IMPREGNATION
Mounting Options
Top Hat Bracket Kit
DIN Bracket Kit
'L' Shaped Bracket Kit
Curved Bracket Kit

Aïe ! Nous n’avons pas retrouvé votre formulaire.