STANDARD RW1000
NO - SP - ST
The Reduced Silver series are suitable for applications where infrequent switching is specified. In such applications the degradation of the tip is minimal and therefore a higher volume of silver is unnecessary.
The RW1000 is designed for use in telecommunication and power distribution applications where an uninterrupted load is switched. These contactors are primarily for use with Direct Current loads but can also be used with Alternating Currents.
The RW1000 features double breaking main contacts with silver alloy tips which are weld resistant, hard wearing and have excellent conductivity. Silver plating on the main contacts is optional for the RW1000. This compact contactor can be busbar mounted vertically or horizontally, but if mounted vertically, the coil should be at the bottom. If the coil is required at the top, we can adjust the contactor to compensate for this.
RW1000 Technical Information
| Application | ||
| Thermal Current Rating | - | 1200A |
| Intermittent Current Rating: | ||
| 30% Duty | - | 2190A |
| 40% Duty | - | 1895A |
| 50% Duty | - | 1695A |
| 60% Duty | - | 1550A |
| 70% Duty | - | 1435A |
| Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*) | ||
| Blowouts | - | |
| No Blowouts | - | |
| Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*) | ||
| Blowouts | - | |
| No Blowouts | 1800A at 60V D.C. | |
| Maximum Recommended Contact Voltages | ||
| Blowouts | - | - |
| No Blowouts | - | 60V |
| Typical Voltage Drop per pole across New Contacts at 1200A | 50mV | |
| Mechanical Durability | > 1,000,000 Cycles | |
| Coil Voltage Available (Us) (Rectifier board required for A.C.) | 6 - 240V | |
RW1000 Features
| Component | Configurations |
|---|---|
| Auxiliary |
STANDARD  STANDARD - GOLD  V3  V3 - GOLD |
| Coil Suppression |
 DIODE  DIODE AND RESISTOR |
| Coil Terminations |
 AMP TAGS  FLYING LEADS  VACCUM IMPREGNATION |
| Mounting Options |
 'L' Shaped Bracket Kit |