STANDARD SW132
NC - DP - ST
The SW132 has been designed for Direct Current loads, typical applications include motors as used on small electric vehicles such as light industrial trucks and powered cars. These contactors are not polarity sensitive thus they can be used for switching Alternating Current loads.
The SW132 features double pole double breaking main contacts with silver alloy tips, which are weld resistant, hard wearing and have excellent conductivity. The SW132 has M8 stud main terminals and 6.3mm spade coil connections. Mounting is via M5 tapped holes or mounting brackets, either supplied fitted, or as separate items. Mounting can be horizontal or vertical, when vertical the M8 contact studs should point upwards. If the requirement is for downwards orientation we can adjust the contactor to compensate for this.
Please note Normally Closed contacts are not suited to make and break load.
SW132 Technical Information
| Application | ||
| Thermal Current Rating | 100A | 100A |
| Intermittent Current Rating: | ||
| 30% Duty | 210A | 210A |
| 40% Duty | 190A | 190A |
| 50% Duty | 170A | 170A |
| 60% Duty | 150A | 150A |
| 70% Duty | 140A | 140A |
| Rated Fault Current Breaking Capacity (Icn) 5ms Time Constant: (In accordance with UL583*) | ||
| Blowouts | - | |
| No Blowouts | 1000A at 80V D.C. | |
| Rated Fault Current Breaking Capacity (Icn) Resistive Load: (In accordance with UL508*) | ||
| Blowouts | - | |
| No Blowouts | - | |
| Maximum Recommended Contact Voltages | ||
| Blowouts | - | - |
| No Blowouts | 80V | 96V |
| Typical Voltage Drop per pole across New Contacts at 100A | 40mV | |
| Mechanical Durability | > 3,000,000 Cycles | |
| Coil Voltage Available (Us) (Rectifier board required for A.C.) | 6 - 240V | |
SW132 Features
| Component | Configurations |
|---|---|
| Auxiliary |
STANDARD  STANDARD - GOLD |
| Coil Suppression |
 DIODE  DIODE AND RESISTOR  BI-DIRECTIONAL DIODE |
| Coil Terminations |
 AMP TAGS  FLYING LEADS  VACCUM IMPREGNATION |